Last update.: 22/05/2020
Data to add the Trunk Ring.
Here in this image shows us the button "Select"; where, if necessary, a system file is entered. This file should only be in PDF format.
A file is selected in the system with the description of the fiber. Once selected, press the "Load" button, and when finished, select the "OK" button. This will enter the desired file.
Once the loading of this new Trunk Ring is completed, along with the selected file (if necessary), we will select the "Accept" button, and you will be entered into our list.
Then we can see that the system allows us to draw the outline of this new Trunk Ring on the map.
Button for drawing the Trunk Ring
To achieve the drawing, what we are going to do first is select the new Trunk Ring entered into the system, in order to show the section of this ring on the map.
Image of how to start the drawing of the Trunk Ring
Screen to draw the Trunk Ring
Here we are going to draw the section. We click on a certain point on the map, which will be our starting point to complete the section. To continue our drawing we are going to click again on a different point on the map, and we are going to see how the desired section is going to be drawn. So on, we are going to continue clicking on the different points of the map that we want. The first point will always appear in a different color from the end point, in this case the first one will be yellow, and the last one will be red. Here is an example of a network section on the map.
Example of the drawing of a Trunk Ring.
In the event that the laying is not straight and extends to the sides, what we are going to do is go back to one of the points that appear in yellow, we will click on it again and from there we will go to the other desired point at side of the previously completed section. Here we can see an example already on the map.
Example of the trace points.
What we did here is mark the point with a red box, where the new section came from, the last stroke, it is always the last click we entered, regardless of where it is located on the map. What we can also see is that the last line is of a different color, this is used to differentiate different types of Fiber Optics used in laying.
We can give you this format through the options that appear at the top of the map. We have the "Edit" option, which modifies only the last stroke entered. And also the "Edit All" option, which will modify all the strokes entered. In edit, you can modify the color, the width of the stroke and the amount of fibers in that stretch.
Complete Trace configuration screen.
And in "Edit All", you can modify only the stroke color and width.
Stroke part configuration screen.
Once the upload is complete, we can accept or cancel the registration. Once accepted, it is also possible, if the user wishes, to “EDIT or DELETE” what was previously done.
Image of the Edit and Delete buttons.